Greenhouse part manufacturing

Sereston is one of the most important components in the construction and assembly of portable greenhouses that are used to attach bows to main columns without the need for welding. The new Sanat Plast (lightning) design with a completely new design is more pressurized and suitable for structures with a higher height and a wider opening width.

The garlic fan is used to move the air inside the greenhouse and has high wind throwing power. Due to the large dimensions of the halls and the distance between the beginning and the end of the halls, greenhouse halls are used to equalize oxygen and carbon dioxide as well as temperature and humidity. It is used farther than the heater.

In large industrial greenhouses in cold areas it is best to use hot water boilers to heat the greenhouses. These boilers are manufactured in a variety of gas, diesel and coal types and increase productivity even as they raise the greenhouse temperature uniformly.

These devices are used to open and close windows, and the new design of the Sanat Plast pinion has a high strength and very low wear and tear.

Shades are selected to protect against excessive sunlight depending on the plant's needs. These shades are produced in simple and energy-saving models.

Hot air heaters are manufactured in gas and diesel types and are suitable for heating greenhouses at relatively low initial costs.

Gearboxes with different powers and at different times are used to open windows, shutters and roll-ups.

Greenhouse fans and fans in different dimensions are used in two types of suckers and blowers in different dimensions and powers in greenhouses for air conditioning as well as indoor air suction.

When negative pressure in the greenhouse is caused by the outlet fans, warm air passes through the damp pads and cool air enters the greenhouse.

The drains are used to drain rainwater from the roof of the greenhouse. It also facilitates access to the upper part of the greenhouse. And they play a very important role in the strength of the greenhouse structure.

In non-soil (hydroponic) planting systems, a feeding machine is used to irrigate and feed the plants simultaneously.

Contains a tank and a variety of valves and tubes that are used to transport water to various parts of the greenhouse.

Installing anti-insect nets in greenhouses is a physical way to combat viral pests and diseases. These nets are so woven that they block insects like Tryps into the greenhouse and do not rot in the sun.

Steering panels, along with various sensors such as temperature, light, humidity, rain, wind speed, wind direction, ... have the task of providing the right conditions for growing a variety of plants. This system is capable of controlling several thousand meters of greenhouse with only one operator.

The sprinkler system, also known as the nozzle, fogger or fog humidifier system, is an effective and efficient tool for cooling and providing moisture to indoor greenhouse plants and mushrooms....